| Item | Specification |
| Operating Temperature | -40°C to 80°C |
| Relative Humidity | ≤95% RH (40°C) |
| NO Contact Rating | 0.25 A / 100 VDC / 3 W |
| NC Contact Rating | 0.5 A / 100 VDC / 10 W |
| Item | Description |
| Contact Type | NC / NO / NC+NO Optional |
| NC Type | Circuit closed when magnet is aligned |
| NO Type | Circuit open when magnet is aligned |
| Wiring | Gray: COM / Red: NO / White: NC |
| Wooden Door Sensing Distance | 10–30 mm |
| Iron Door Sensing Distance | 30–45 mm |
Installation Guidelines for Magnetic Control Switch
1. Mounting Position
Install the wired switch on the door frame, and mount the magnet on the movable door or window. Secure both parts firmly with screws.
2. Installation Alignment
The switch and magnet must be installed parallel to each other, with a gap of no more than 1 cm.
Incorrect installation may cause sensing failure or reduce the sensing distance.
3. Operating Environment
Avoid installing the magnetic switch in environments with strong magnetic fields or high-current interference.
4. Wiring Precautions
The magnetic control switch cannot be connected directly to a power load.
Do not connect the wiring directly to the power supply.



-74x74.png)
